From Classic Tool Design, Inc.
The following information will give you an overview of flushing with Cobra™ products; what we call The Cobra™ Solution.
At Classic Tool Design, we manufacture a full line of Automotive Air Conditioning tools and equipment. All of our products must meet the following mandate: They must be dependable, efficient and cost effective, environmentally acceptable and easy on the technician.
All orders are shipped from our factory directly to you via UPS ground, unless otherwise requested.
You could use the solution - The Cobra™ Solution.
A/C System Flushing... The Cobra™ Solution.
The Objective of the Cobra™ Closed-loop Flush Machine and Cobra™ Flush is to provide the reasonable assurance of a clean, contamination free A/C system by flushing away dirt and debris. Because even a small quantity of contaminant left inside the A/C system you just serviced can come back to haunt you.
The Concept: The Cobra™ continuously circulates flush fluid through:
· the A/C system (one half at a time),
· and through a Cobra™ flush filter, so that only clean flush fluid is pumped through the A/C system being serviced.
The Machine: The Cobra™ A/C System Flush Machine is an Air Operated, Fully Automatic and Continuous, Closed-Loop Flush & Purge Machine. Designed to be easy, safe and labor saving; You hook it up and it does the work.
I. Flushing procedures, an overview:
1. Choose either the Hi or Lo side to hook up to first.
2. Connect Cobra Couplers to the A/C.
3. Flush for 20 to 30 minutes. Extend flushing time as needed.
II. Purging procedures, an overview:
1. After Flush cycle is complete, turn lever to Purge.
2. Purge for 20 to 30 minutes. Extend purging time as needed.
III. CHECK FLUSH FILTER.
IV. REPEAT FLUSH AND PURGE PROCEDURES ON THE OTHER SIDE OF THE A/C SYSTEM.
|
Special Team Cobra Package: The Cobra, 2 Gallons Cobra Flush and 2
Cobra Flush Filters.
Order
a Cobra |
|


 |